脉冲涡流检测技术是涡流检测技术的一个新兴分支,其宽频谱的激励方式使得脉冲涡流检测技术在航空航天、压力容器、铁路和管道等领域广泛应用。综述了脉冲涡流检测技术在金属缺陷、应力和热成像等方面的国内外研究进展,分析了脉冲涡流检测技术的发展方向。
所属栏目
2011年远东无损检测论坛论文精选
收稿日期
2011/5/31
作者单位
周德强:江南大学 机械工程学院,无锡214122
田贵云:南京航空航天大学 自动化学院,南京210016
王海涛:南京航空航天大学 自动化学院,南京210016
尤丽华:江南大学 机械工程学院,无锡214122
备注
周德强(1979-),男,博士,讲师,主要研究方向为传感器技术、电磁无损检测与评估。
引用该论文:
ZHOU De-Qiang,TIAN Gui-Yun,WANG Hai-Tao,YOU Li-Hua.The Recent Developments of Pulsed Eddy Current Nondestructive Testing Technology[J].Nondestructive Testing,2011,33(10):25~29
周德强,田贵云,王海涛,尤丽华.脉冲涡流无损检测技术的研究进展[J].无损检测,2011,33(10):25~29
参考文献
【1】
Moulder J C, Bieber J A, Ward W W, et al. Scanned pulsed eddy current instrument for non-destructive inspection of aging aircraft[J]. SPIE,1996,2945(2):2-13.
【2】
Lebrun B, Jayet Y, Baboux J C. Pulsed eddy current application to the detection of deep cracks[J]. Materials Evaluation,1995,53(11):1296-1300.
【3】
Lebrun B, Jayet Y, Baboux J C. Pulsed eddy current signal analysis: application to the experimental detection and characterization of deep flaws in highly conductive materials[J]. NDT&E International,1997,30(3):163-170.
【4】
杨宾峰,罗飞路,张玉华,等.飞机多层结构中裂纹的定量检测及分类识别[J].机械工程学报,2006,42(2):63-67.
【5】
Anton I Lavrentyev, Paul A Stucky, William A Veronesi. Feasibility of ultrasonic and eddy current methods for measurement of residual stress in shot peened metals[J]. Review of Progress in Quantitative Nondestructive Evaluation, American Institute of Physics,2000:1621-1628.
【6】
Mark P Blodgett, Peter B Nagy. Eddy current assessment of near-surface residual stress in shot-peened nickel-base superalloys[J]. Journal of Nondestructive Evaluation,2004,23(3):107-123.
【7】
Feng Yu, Peter B Nagy. Simple analytical approximations for eddy current profiling the near-surface residual stress in shot-peened metals[J]. Journal of Applied Physics,2004,96(2):1257-1266.
【8】
Feng Yu, Peter B Nagy. Dynamic piezoresistivity calibration for eddy current nondestructive residual stress measurement[J]. Journal of Nondestructive Evaluation,2005,24(4):143-151.
【9】
Feng Yum, Peter B Nagy. On the influence of cold work on eddy current characterization of near-surface residual stress shot-peened nickel-base superalloys[J]. Journal of Nondestructive Evaluation,2006,25(3):107-122.
【10】
Bassam A Abu-Nabah, Peter B Nagy. Iterative inversion method for eddy current profiling of near-surface residual stress in surface-treated metals[J]. NDT&E International,2006(39):641-651.
【11】
Bassam A Abu-Nabah, Peter B Nagy. High-frequency eddy current conductivity spectroscopy for residual stress profiling in surface-treated nickel-base superalloys[J]. NDT&E International,2007(40):405-418.
【12】
Bassam A Abu-Nabah, Feng Yu, Waled T Hassan, et al. Eddy current residual stress profiling in surface-treated engine alloys[J]. Nondestructive Testing and Evaluation,2009,24(1):209-232.
【13】
Milne J M, Reynolds W N. The nondestructive evaluation of composites and other materials by thermal pulse video thermography[J]. SPIE,1984(520):119-122.
【14】
Morbidini M, Cawley P, Lowe M J S, et al. A quantitative investigation of thermosonics[C]. WCNDT, Montreal, Canada:2004.
【15】
Riegert G, Pfleiderer K, Gerhard H, et al. Modern methods of NDT for inspection of aerospace structure[C]. Berlin, Germany: ECNDT,2006.
【16】
Dodd C V, Deeds W E. Analytical solutions to eddy-current probe-coil problems[J]. Journal of Applied Physics,1968,39(6):2829-2837.
【17】
Luquire J W, Deeds W E, Dodd C V. Alternating current distribution between planar conductors[J]. Journal of Applied Physics,1970,41(10):3983-3991.
【18】
Cheng C C, Dodd C V, Deeds W E. General analysis of probe coils near stratified conductors[J]. Int J Nondestr Test,1971(3):109-130.
【19】
Kolyshikin A A, Smolyakov A P, Remi Vaillancourt. Analytical solution in eddy-current testing of double-layer media with depth-varying magnetic properties[J]. Magnetics, IEEE Transactions on,1991,28(2):4360-4365.
【20】
Uzal E, Rose J H. The impedance of eddy current probes above layered metals whose conductivity and permeability vary continuously[J]. Magnetics, IEEE Transactions on,1993,29(2):1869-1873.
【21】
Erol Uzal, John C Moulder, Screeparma Mitra, et al. Impedance of coils over layered metals with continuously variable conductivity and permeability: theory and experiment[J]. Journal of Applied Physics,1993,74(3):2076-2089.
【22】
Kolyshkin A A, Vaillancourt R. Analytical solutions to eddy-current testing problems for a layered medium with varying properties[J]. Magnetics, IEEE Transactions on,1997,33(4):2473-2477.
【23】
Theodoulidis T P, Tsiboukis T D, Kriezis E E. Analytical solutions in eddy current testing of layered metals with continuous conductivity profiles[J]. Magnetics, IEEE Transactions on,1995,31(3):2254-2260.
【24】
Bowler J, Johnson M. Pulsed eddy current response to a conducting half space[J]. IEEE Transactions on Magnetics,1997,33(3):2258-2264.
【25】
Fangwei Fu, John Bowler. Transient eddy-current driver pickup probe response due to a conductive plate[J]. IEEE Transactions on magnetics,2006,42(8):2029-2037.
【26】
Theodoros Theodoulidis. Developments in calculating the transient eddy-current response from a conductive plate[J]. IEEE Transations on magnetics,2008,44(7):1894-1896.
【27】
Yong Li, Theodoros Theodoulidis, Gui Yun Tian. Magnetic field-based eddy-current modeling for multilayered specimens[J]. IEEE Transactions on magnetics,2007,43(11):4010-4015.
【28】
Yong Li, Gui Yun Tian, Anthony Simm. Fast analytical modeling for pulsed eddy current evaluation[J]. NDT&E International,2008(41):477-483.
【29】
Bieber J A, Shaligram S K, Rose J H, et al. Time-gating of pulsed eddy current signals for defect characterization and discrimination in aircraft lap-joints[J]. Review of progress in QNDE,1997(16B):1915-1921.
【30】
Moulder J C, Bieber J A. Pulsed eddy current measurements of corrosion and cracking in aging aircraft[J]. Materials Research Society Symposium Proceedings of Nondestructive Characterization of Materials in Aging Systems,1998(503):263-268.
【31】
Rummel W D, Bowler J R. Integrated quantitative nondestructive evaluation(NDE) and reliability assessment of aging aircraft structures[J]. Final Report for The United States Air Force Office of Scientific Research,2001(27).
【32】
Smith R A, Hugo G R. Deep corrosion and crack detection in aging aircraft using transient eddy current NDE[J]. Review of Progress in Quantitative NDE,1999:1401-1408.
【33】
Smith R A, Hugo G R. Transient eddy current NDE for ageing aircraft-capabilities and limitations[J]. Insight: Non-Destructive Testing and Condition Monitoring,2001,43(1):14-25.
【34】
LepineB A, Giguere J S R, Forsyth D S, et al. Applying pulsed eddy current NDI to the aircraft hidden corrosion problem[J]. Review of Progress in QNDE,2000(11):449-456.
【35】
Giguere S, Lepine B A, Dubois J M S. Pulsed eddy current technology: characterizing material loss with gap and lift off variations[J]. Res Nondestr Eval,2001(13):119-129.
【36】
Mandache C, Lefebvre J H V. Transient and harmonic eddy currents: Lift-off point of intersection[J]. NDT&E international,2006(39):57-60.
【37】
Ali Sophian, Gui Yun Tian, David Taylor, et al. A feature extraction technique based on principal component analysis for pulsed eddy current NDT[J]. NDT&E International,2003(36):37-41.
【38】
Gui Yun Tian, Ali Sophian. Defect classification using a new feature for pulsed eddy current sensors[J]. NDT&E International,2005(38):77-82.
【39】
Tianlu Chen, Gui Yun Tian, Ali Sophian, et al. Feature extraction and selection for defect classification of pulsed eddy current NDT[J]. NDT&E International,2008,41(6):1-10.
【40】
Giguère S, Lepine B A, Dubois J M S. Pulsed eddy current technology: characterizing material loss with gap and lift-off variations[J]. Research in Nondestructive Evaluation,2001,13(3):119-129.
【41】
Gui Yun Tian, Sophian A. Reduction of lift-off effects for pulsed eddy current NDT&E International,2005,38(4):319-324.
【42】
Gui Yun Tian, Yong Li, and Catalin Mandache.Study of Lift-Off Invariance for Pulsed Eddy-Current Signals[J]. IEEE Transactions on Magnetics,2009,45(1):184-191.
【43】
周德强,田贵云,王海涛,等.脉冲涡流技术在应力检测中的应用[J].仪器仪表学报,2010,31(7):1588.
【44】
Maxim Morozov, Gui Yun Tian, Philip J.Withers. The pulsed eddy current response to applied loading of various aluminium alloys[J]. NDT&E International,2010(43):493-500.
【45】
IIham Zainal Abidin, Gui Yun Tian, John Wilson, et al. Quantitative evaluation of angular defects by pulsed eddy current thermography[J]. NDT&E International,2010(43):537-546.
【46】
Wilson J, Tian G Y, Abidin I Z, et al. Pulsed eddy current thermography: system development and evaluation[J]. Insight,2010,52(2):87-90.
【47】
Suixian Yang, Gui Yun Tian, Ilham Zainal Abidin, et al. Simulation of edge cracks using pulsed eddy current stimulated thermography[J]. Journal of Dynamic Systems, Measurement, and Control, Vol133(1), doi:10.1115/1.4002710.
【48】
Edwards R S, Sophian A, Dixon S, et al. Data fusion for defect characterization using a dual probe system[J]. Sensors and Actuators, A: Physical,2008,144(1):222-228.
【49】
Gui Yun Tian, John Wilson, Maxim Morozov. Complementary electromagnetic nondestructive evaluation[J]. Review of Progress in Quantative Nondestructive Evaluation,2011(30A,B):1256-1263.