介绍了管道缺陷无损检测的常用方法(如射线检测、超声检测、涡流检测和基于光学原理的检测技术)及其原理和各自的优缺点。指出各检测方法均有自身的独特性，当仅用一种方法不能得到理想的检测结果时，需多种方法结合使用。
所属栏目
综 述
收稿日期
2006/4/3
作者单位
李雪辰:再制造国防重点实验室，北京 100072
徐滨士:再制造国防重点实验室，北京 100072
董世运:再制造国防重点实验室，北京 100072
张旭明:再制造国防重点实验室，北京 100072
备注
李雪辰(1978-)男，研究生，主要研究方向为管道无损检测技术。
引用该论文:
LI Xue-chen,XU Bin-shi,DONG Shi-yun,ZHANG Xu-ming.Nondestructive Testing Technologies for the Inner Defect Detection of Pipeline[J].Nondestructive Testing,2007,29(10):603～606
李雪辰,徐滨士,董世运,张旭明.管道内壁缺陷无损检测技术[J].无损检测,2007,29(10):603～606
被引情况:
【1】
纪丽静,施养杭, "探地雷达在工程检测中的应用与发展",无损检测
32, 201-204(2010)
参考文献
【1】
Li Yan. Sensitivity evaluation in double-wall or multi-layer radiographic inspection of welds in pressure vessels[J]. Insight,2003,45(10):672-675.
【2】
Nagarkar V, Guptra T. Klugerman Y. Structured CsI(Tl) scintillators for X-ray imaging applications［J］. IEEE Trans on Nuclear Science,1998,45(3):492-496.
【3】
Gondrom S. X-ray computed laminography: An approach of computed tomography for applications with limited access[J]. Nucl Eng Design,1999,190:141-147.
【4】
Elbakri I A, Fessler J A. Statistical image reconstruction for polyenergetic X-ray computed tomography[J]. IEEE Transactions on Med Imaging,2002,21(2):89-99.
【5】
Leblans P. A new needle-crystalline computed radiography detector[J]. Journal of Digit Imaging,2000,13(2):117-120.
【6】
Reber K, Beller M, Willems H, et al. A new generation of ultrasonic in-line inspection tools for detecting, sizing and locating metal loss and cracks in transmission pipelines[J]. IEEE Ultrasonic Symposium,2002:665-671.
【7】
Birring A S. Selection of NDT techniques for inspection of heat exchange tubing[C]. Proc of the ASNT Int Conf on petroleum industy inspection Houston, TX: ASNT,1999:1-14.
【8】
Yusa N, Chen Z, Miya K. Quantitative profile evaluation of natural cracks in a steam generator tube from eddy current signals[J]. International Journal of Applied Electromagnetics and Mechanics,2000,12:139-150.
【9】
Tsuchida1 Y, Takahata1 R, Chady T, et al. Numerical analysis of multi-frequency excitation spectrogram method for eddy current testing[J]. Review of Progress in Quantitative Nondestructive Evaluation,2001,20:627-634.
【10】
Tsubouchi T, Takaki S, Kawaguchi Y, et al. A straight pipe observation from the inside by laser spot array and a TV camera[C]. Proc of the IEEE/ RSJ International Conference on Intelligent Robots and Systems,2000:82-87.
【11】
Okatani T, Deguchi K. Shape reconstruction from an endoscope image by shape from shading technique for a point light source at the projection center[J]. Computer vision and image understanding,1997,66(2):119-131.
【12】
Hasegawa K, Sato Y. High speed endoscope type 3-D measurement[C]. Proc of Fourth Asian Conference on Computer Vision,2000,Ⅱ:887-892.
【13】
Richard D. Laser profilometry as an inspection method for reformer catalyst tubes[J]. Materials Evaluation,1999,57(4):420-422.
【14】
Cowling T. Innovative furnace tube inspection system[J]. Materials Evaluation,1999,57(4):447-449.
