Develop inspection plans for fixed equipment/piping/valves based on project requirement;
根据项目要求制定检验/试验计划;
Effectively execute common inspection to perform job responsibilities such as drawing control, material quality control, welding control, NDT control, HT control, testing control, surface control, etc.
高效率执行相关检验,如图纸审查,材料检验,焊接控制,无损检测审查,热处理审查,见证试验,表面处理检查 等;
Identifying project Quality Assurance plan inspection requirements, equipment items to be inspected, manufacturing shops and level of inspection;
项目质量保证体系审核;
_ Performing shop visits during fabrication for verification of compliance to code and design specifications and assess fabricators performance;
车间访问确认是否符合相关标准规范;
_ Preparing and maintaining inspection file for each equipment item with detailed drawings, specification purchase order and correspondence;
根据项目要求进行检验文件审查;
_ Working with project scheduling department, expediting and purchasing departments, and preparing an inspection schedule; tracking schedule and setting up scheduled inspection visits with manufacturing shops;
根据项目要求制定检验时间计划并跟踪执行;
_ Traveling to manufacturing shops and physically inspecting the equipment items both internally and externally with appropriate NDE technology;
访问车间并亲自用相关设备进行容器的内部及外部检查
_ Preparing detailed inspection reports describing the extent of the inspection, andreporting all non-conforming items to MI manager for their analysis and approvedcorrective actions. Issuing written release for shipment;
出具相应检验报告详述相关符合或不符合项,并提出分析意见。
_ Passively auditing shop progress and feedback to expediting;
工厂审核
? Develop contacts with personnel at each equipment supplier (Quality Assurance, Engineering and Shop Supervisors); 工作中的相关协调
? Provides specialized knowledge and skills in measuring and evaluating the as-built quality of process equipment in the Quality Control Inspection; Assure the equipment meets all QA/QC Manager
相关的检验技巧和设备使用技能
岗位要求:
B.S. or above, major in chemical process technology or chemical engineering or welding, or metal material engineering, or equivalent;
本科或以上,化工工程,设备,材料,焊接等专业;
· At least 8 years of experience with shop inspection, or inspections in the chemical plant.
8年以上车间检验或现场压力容器检验工作经验;
· Experiences in using/analyzing of engineering documents etc;
熟练应用相应的工程文件
· Have PT Level II, MT Level II, UT Level II; and ASME, or API 510, 570, 653 certifications is preferred.
有NDT证书或具有ASME, API, 等证书或经验优先;
· Familiar with the damage mechanism of equipment and piping in chemical plant,
熟悉常见的失效方式或机理
· Familiar with of Engineering codes including: GB; ASME, API, ANSI, ASNT
熟悉相关标准
· Workable Oral English, good written English;
英文口语交流及书写;
· Ability or knowledge to handle mechanical equipment in a safe manner;
熟悉工厂中相关机械;
· High responsibility and team work spirit;
高度责任心及团队精神;
CopyrightC 2009-2023 All Rights Reserved 版权所有 无损检测人才网 粤ICP备19133631号-1
地址: EMAIL:364759881@qq.com
Powered by PHPYun.