返回顶部
位置:标准分享网>机械工程材料论文>烧结时间对多孔NiTi形状记忆合金时效时马氏体相变的影响
烧结时间对多孔NiTi形状记忆合金时效时马氏体相变的影响
  • 资料大小:

  • 更新时间:

    2009-12-18

  • 授权方式:

    共享学习

  • 资料格式:

    PDF

  • 软件等级:

  • 官方主页:

    http://www.ndt88.com

资料简介

采用DSC和SEM等研究了采用不封装热等静压法(CF-HIP)在不同烧结时间下制备的多孔NiTi形状记忆合金时效时的马氏体相变行为。结果表明: 经1 050 ℃烧结1 h后, 合金中主要含有Ti2Ni相和大块的Ni3Ti相, 随着烧结时间的延长, 大块Ni3Ti相逐渐消失, Ti2Ni相几乎没有变化; 将烧结试样经450 ℃时效后, 随着时效时间的延长, Ni4Ti3相在母相中逐渐析出长大, 短时烧结试样的马氏体相变过程分为三步(B2→R, R→B19′ 和B2→B19′), 而长时烧结试样的则为两步(B2→R和R→B19′)。

所属栏目

国家自然科学基金资助项目(50701019)

收稿日期

2009/12/182010/7/15

作者单位

袁斌:华南理工大学材料科学与工程学院, 广州 510640
赖铭:华南理工大学材料科学与工程学院, 广州 510640
梁锦霞:华南理工大学材料科学与工程学院, 广州 510640
曾美琴:华南理工大学材料科学与工程学院, 广州 510640
高岩:华南理工大学材料科学与工程学院, 广州 510640

备注

袁斌(1977-), 男, 江西泰和人, 副教授, 博士。

引用该论文:

YUAN Bin,LAI Ming,LIANG Jin-xia,ZENG Mei-qin,GAO Yan.Effect of Sintering Time on Martensitic Transformation during Ageing of Porous NiTi Shape Memory Alloys[J].Materials for mechancial engineering,2011,35(1):6~10
袁斌,赖铭,梁锦霞,曾美琴,高岩.烧结时间对多孔NiTi形状记忆合金时效时马氏体相变的影响[J].机械工程材料,2011,35(1):6~10


参考文献

【1】

OTSUKA K, REN X. Physical metallurgy of Ti-Ni-based shape memory alloys[J].Prog in Mater Sci, 2005, 50: 511-678.

【2】

ITIN V I, GJUNTER V E, SHABALOVSKAYA S A, et al. Mechanical properties and shape memory of porous nitinol[J].Mater Charac, 1994, 32: 179-187.

【3】

SHABALOVSKAYA S A. On the nature of the biocompatibility and on medical applications of NiTi shape memory and superelastic alloys[J].Bio-Med Mater Eng, 1996, 6: 267-289.

【4】

OTSUKA K, WAYMAN C M. Shape memory materials[M].Cambridge: Cambridge University Press, 1998: 50-102.

【5】

TADAKI T, NAKATA Y, SIMIZU K, et al. Crystal structure composition and morphology of a precipitate in an aged Ti-51 at%Ni shape memory alloy[J].Trans JIM, 1986, 27: 731-740.

【6】

BATAILLARD L, BIDAUX J E, GOTTHARDT R. Interaction between microstructure and multiple-step transformation in binary NiTi alloys using in-situ transmission electron microscopy observations[J].Philos Mag, 1998, 78: 327-344.

【7】

KHALIL-ALLAFI J, REN X, EGGELER G. The mechanism of multistage martensitic transformations in aged Ni-rich NiTi shape memory alloys[J].Acta Mater, 2002, 50: 793-803.

【8】

FUJISHIMA K, NISHIDA M, MORIZONO Y K, et al. Effect of heat treatment atmosphere on the multistage martensitic transformation in aged Ni-rich Ti-Ni alloys[J].Mater Sci & Eng A, 2006, 438/440: 489-494.

【9】

CARROLL M C, SOMSEN Ch, EGGELER G. Multiple-step martensitic transformations in Ni-rich NiTi shape memory alloys[J].Scr Mater, 2004, 50: 187-192.

【10】

CHROBAK D, STROZ D, MORAWIEC H. Effect of early stages of precipitation and recovery on the multi-step transformation in deformed and annealed near-equiatomic NiTi alloy[J].Scr Mater, 2003, 48: 571-576.

【11】

FAN G, CHEN W, YANG S, et al. Origin of abnormal multi-stage martensitic transformation behavior in aged Ni-rich Ti-Ni shape memory alloys[J].Acta Mater, 2004, 52: 4351-4362.

【12】

YUAN B, ZHANG XP, CHUNG CY, et al. The effect of porosity on phase transformation behavior of porous Ti-50.8-at%Ni shape memory alloys prepared by capsule-free hot isostatic pressing[J].Mater Sci & Eng A, 2006, 438/440: 585-588.

【13】

YUAN B, CHUNG CY, ZHU M. Microstructure and martensitic transformation behavior of porous NiTi shape memory alloy prepared by HIP processing[J].Mater Sci & Eng A, 2004, 382(1/2): 181-187.

【14】

袁斌, 梁锦霞, 李星, 等.工艺参数对热等静压法制备多孔NiTi记忆合金孔隙特性的影响[J].机械工程材料, 2008, 32(3): 8-12.

【15】

KATO H, KOYARI T, TOKIZANE M, et al. Stress-strain behavior and shape memory effect in powder metallurgy TiNi alloys[J].Acta Metall Mater, 1994, 42(4): 1351-1358.

【16】

MIYAZAKI S, OTSUKA K, WAYMAN CM. The stage transformation behavior in aged NiTi[J].Acta Metall, 1989, 37: 1873-1884.

标准分享网无损检测论文频道,免费下载【烧结时间对多孔NiTi形状记忆合金时效时马氏体相变的影响】,仅供学习使用,不得商用,如需商用请购买正版烧结时间对多孔NiTi形状记忆合金时效时马氏体相变的影响。谢谢合作

【关键词】 多孔NiTi形状记忆合金 烧结时间 马氏体相变  袁斌 赖铭 梁锦霞 曾美琴 高岩

猜下面文档对你有所帮助
机械工程材料论文排行