基于特定的热机械处理工艺, 在不同的温度下(1 080, 1 200 ℃)对一种新型含铝奥氏体耐热钢(AFA)进行了再结晶处理; 对AFA钢在高温(700 ℃, 150 MPa)下的蠕变性能以及蠕变前后AFA钢的显微组织进行了分析。结果表明: 再结晶温度对AFA钢的组织具有明显的影响, 温度为1 200 ℃时, 其晶粒尺寸为60 μm, MC析出相尺寸为10 nm, 分布弥散, 分布密度也较大; 温度为1 080 ℃时, 晶粒尺寸为10 μm, MC析出相尺寸为50 nm, 分布密度较小; 1 200 ℃再结晶处理后AFA钢比1 080 ℃处理后拥有更好的抗蠕变性能(前者蠕变寿命是1 530 h, 后者为650 h)。
所属栏目
材料性能及其应用上海市科学技术委员会基础研究重点项目(12JC1405000)
收稿日期
2013/12/132014/12/25
作者单位
刘一泽:上海交通大学材料科学与工程学院, 上海 200240
董显平:上海交通大学材料科学与工程学院, 上海 200240
张澜庭:上海交通大学材料科学与工程学院, 上海 200240
孙锋:上海交通大学材料科学与工程学院, 上海 200240
备注
刘一泽(1988-), 男, 河北保定人, 硕士研究生。
引用该论文:
LIU Yi-ze,DONG Xian-ping,ZHANG Lan-ting,SUN Feng.Effect of Recrystallization Temperature on Microstructure and Creep Properties of a Novel Austenitic Heat Resistant Steel Containing Aluminum[J].Materials for mechancial engineering,2015,39(4):86~90
刘一泽,董显平,张澜庭,孙锋.再结晶温度对新型含铝奥氏体耐热钢显微组织及蠕变性能的影响[J].机械工程材料,2015,39(4):86~90
被引情况:
【1】
徐向棋,陈子潘,王泾文,张少伍,罗来辉,王松林, "800 ℃长期氧化过程中含铝奥氏体耐热钢中第二相的演化规律",机械工程材料
40, 6-8(2016)
参考文献
【1】
杨富,李为民,任永宁.超临界/超超临界锅炉用钢[J].电力设备,2004,5(10):41-46.
【2】
周一工,徐炯,胡晓初,等.大力发展清洁高效的超临界超超临界发电技术[J].装备机械,2011(1):2-6.
【3】
纪世东,周荣灿,王生鹏,等.700 ℃等级先进超超临界发电技术研发现状及国产化建议[J].热力发电,2011(7):86-88.
【4】
谢锡善. 我国高温材料的应用与发展[J].机械工程材料,2004,28(1):2-8
【5】
闫超鹏,孙锋,单爱党.超超临界火电机组用铁素体耐热钢的研究现状[J].机械工程材料,2008,32(12):1-4.
【6】
YAMAMOTO Y, BRADY M P, LU Z P, et al. Alumina-forming austenitic stainless steels strengthened by Laves phase and MC carbide precipitates[J].Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science,2007,38(11):2737-2746.
【7】
YAMAMOTO Y, BRADY M P, LU Z P, et al. Creep-resistant, Al2O3-forming austenitic stainless steels[J].Science,2007,316:433-436.
【8】
BRADY M, YAMAMOTO Y, SANTELLA M L, et al. The development of alumina-forming austenitic stainless steels for high-temperature structural use[J].The Journal of the Minerals, Metals & Materials Society,2008,60(7):12-18.
【9】
YAMAMOTO Y, BRADY M P, SANTELLA M L, et al. Overview of strategies for high-temperature creep and oxidation resistance of alumina-forming austenitic stainless steels[J].Metallurgical and Materials Transactions: A,2011,42(4):922-931.
【10】
BEI H, YAMAMOTO Y, BRADY M P, et al. Aging effects on the mechanical properties of alumina-forming austenitic stainless steels[J].Materials Science and Engineering,2010,527:2079-2086.
【11】
TODA Y, SEKI K, KIMURA K, et al. Effects of W and Co on long-term creep strength of precipitation strengthened 15Cr ferritic heat resistant steels[J].ISIJ International,2003,43:112-118.
【12】
DIMMLER G, WEINERTA P, KOZESCHNIKA E, et al. Quantification of the Laves phase in advanced 9-12% Cr steels using a standard SEM[J].Materials Characterization,2003,51(5):341-352.
【13】
CUI H R, SUN F, CHEN K, et al. A structural materials properties microstructure and processing[J].Materials Science and Engineering,2010,527:7505-7509.
【14】
赵林.700 ℃等级超超临界电站用含铝奥氏体钢的高温强化[D].上海: 上海交通大学,2013.
【15】
余永宁.材料科学基础[M].北京: 高等教育出版社, 2006:744-755.
【16】
OSETSKY YU N, BACON D J. Void and precipitate strengthening in α-iron: what can we learn from atomic-level modelling[J].Journal of Nuclear Materials,2003,323(2/3):268-280.
【17】
YAMAMOTO Y, BRADY M P, LU Z P, et al. Multi-phase high temperature alloys: exploration of laves-strengthened steels[C]//Annual Conference On Fossil Energy Materials. [S.l.]:[s.n.], 2006:20-27.
【18】
SATYANARAYANA D V V, MALAKONDAIAH G, SARMA D S. Steady state creep behaviour of NiAl hardened austenitic steel[J].Materials Science and Engineering: A,2002,323(1):119-128.