简要叙述了镁合金疲劳性能的研究概况,详细介绍了镁合金疲劳裂纹萌生和扩展机理的主要研究成果,介绍了显微组织、合金元素、环境条件、表面状态、加载条件以及温度等内外部因素对其疲劳性能的影响规律,在分析目前镁合金疲劳性能研究的不足的基础上,对镁合金疲劳性能的研究方向进行了展望.
所属栏目
综述
收稿日期
2009/4/282009/9/24
作者单位
张爱民:大连交通大学材料科学与工程学院,轨道交通关键材料辽宁省重点实验室, 大连 116028
权高峰:大连交通大学材料科学与工程学院,轨道交通关键材料辽宁省重点实验室, 大连 116028
备注
张爱民(1983-),男,辽宁锦州人,硕士研究生.
引用该论文:
ZHANG Ai-min,QUAN Gao-feng.Prospect and Research Progress of Fatigue Properties of Magnesium Alloys[J].Materials for mechancial engineering,2010,34(5):1～4
张爱民,权高峰.镁合金疲劳性能的研究现状及展望[J].机械工程材料,2010,34(5):1～4
参考文献
【1】
LU Y,TAHERI F,GHARGHOURI M.Study of fatigue crack incubation and propagation mechanisms in a HPDC AM60B magnesium alloy[J].Alloys Compd,2008,466:214-227.
【2】
LU Y,TAHERI F,GHARGHOURI M,et al.Experimental and numerical study of the effects of porosity on fatigue crack initiation of HPDC magnesium AM60B alloy[J].Alloys Compd,2009,470:202-213.
【3】
KADIRI H E,XUE Y,HORSTEMEYER M F,et al.Identification and modeling of fatigue crack growth mechanisms in a die-cast AM50 magnesium alloy[J].Acta Mater,2006,54:5061-5076.
【4】
MAYER H,PAPAKYRIACOU M,ZETTL B,et al.Endu-rance limit and threshold stress intensity of die cast magnesium and aluminium alloys at elevated temperatures[J].Fatigue,2005,27:1076-1088.
【5】
ORSTEMEYER M F,YANG N,GALL K,et al.High cycle fatigue of a die cast AZ91E-T4 magnesium alloy[J].Acta Mater,2004,52:1327-1336.
【6】
OGAREVIC V V,STEPHENS R I.Fatigue of magnesium alloys[J].Annu Rev Mater Sci,1990,20:141-177.
【7】
NAN Z Y,ISHIHARA S,GOSHIMA T,et al.Scanning probe microscope observations of fatigue process in magnesium alloy AZ31 near the fatigue limit[J].Scripta Mater,2004,50:429-434.
【8】
UEMATSU Y,TOKAJI K,KAMAKURA M,et al.Effect of extrusion conditions on grain refinement and fatigue behaviour in magnesium alloys[J].Mater Sci,2006,434:131-40.
【9】
YANG F,YIN S M,LI S X,et al.Crack initiation mechanism of extruded AZ31 magnesium alloy in the very high cycle fatigue regime[J].Mater Sci,2008,491:131-136.
【10】
XUE Y,HORSTEMEYER M F,MCDOWELL D L,et al.Microstructure-based multistage fatigue modeling of a cast AE44 magnesium alloy[J].Fatigue,2007,29:666-676.
【11】
SAJURI Z B,MIYASHITA Y,HOSOKAI Y,et al.Effects of Mn content and texture on fatigue properties of as-cast and extruded AZ61 magnesium alloys[J].Inter J Mech Sci,2006,48(2):198-209.
【12】
NAN Z Y,ISHIHARA S,MCEVILY A J,et al.On the sharp bend of the S-curve and the crack propagation behavior of extruded magnesium alloy[J].Scripta Mater,2007,56:649-52.
【13】
杨友,刘勇兵,杨晓红,等.稀土元素对AZ91D压铸镁合金高周疲劳性能的影响[J].金属热处理,2006,31(7):18-22.
【14】
SOMEKAWA H,MUKAI T.Fracture toughness in Mg-Al-Zn alloy processed by equal-channel-angular extrusion[J].Scripta Mater,2006,54:633-638.
【15】
YANG Y,LIU Y B.High cycle fatigue characterization of two die-cast magnesium alloys[J].Mater Character,2008,59:567-570.
【16】
刘文才,董杰,张平,等.镁合金疲劳性能的研究现状及展望[J].轻金属,2008(7):44-49.
【17】
ELIEZER A,CUTMAN E M,ABRAMOV E,et al.Corrosion of fatigue of die cast and extruded magnesium alloys[J].J Light Metals,2001,1(3):179-186.
【18】
HILPERT M,WAGNER L.Corrosion fatigue behavior of the high-strength magnesium alloy AZ80[J].Materials Engineering and Performance,2000,9(4):402-407.
【19】
SERTSYUK V A,GRINBERG N M.Fatigue fracture of some magnesium alloys in vacuum at room and low temperatures[J].Materials Science,1980,16(4):362-365.
【20】
WU L,JAIN A,BROWN D W,et al.Twinning-detwinning behavior during the strain-controlled low-cycle fatigue testing of a wrought magnesium alloy ZK60A[J].Acta Mater,2008,56:688-695.
【21】
YIN S M,YANG H J,LI S X,et al.Cyclic deformation behavior of as-extruded Mg-3%Al-1%Zn[J].Scripta Mater,2008,58:751-754.
【22】
ISHIHARA S,NAN Z,GOSHIMA T.Effect of microstructure on fatigue behavior of AZ31 magnesium alloy[J].Mater Sci Eng,2007,468:214-222.
【23】
WAGNER L.Mechanical surface treatments on titanium,aluminum and magnesium alloys[J].Mater Sci Eng A,1999,263(2):210-216.
【24】
ZHANG P,LINDEMANN J.Influence of shot peening on high cycle fatigue properties of the high-strength wrought magnesium alloy AZ80[J].Scripta Mater,2005,52(6):485-490.
【25】
ZHANG P,LINDEMANN J.Effect of roller burnishing on the high cycle fatigue performance of the high-strength wrought magnesium alloy AZ80[J].Scripta Mater,2005,52(10):1011-1015.
