利用非平衡磁控溅射与离子源复合沉积技术,以高纯甲烷和氮气作反应气体,钨为溅射靶,在40Cr、Si(100)基片和不锈钢基体上分别制备了厚度约为2 μm的掺杂钨类金刚石膜,并在类金刚石膜与基体间沉积了过渡层;应用X射线衍射、拉曼光谱、俄歇电子能谱等手段分析了掺杂钨类金刚石膜的显微结构和表面成分;应用球盘摩擦磨损试验机以及纳米硬度计等测试了膜的硬度、摩擦性能及结合强度.结果表明:所制备的膜表面均匀、致密、光滑,具有典型的类金刚石结构特征;掺杂的钨弥散分布在无定型的碳中,一部分形成W2C微晶相;当膜中钨原子分数约为20%时,膜的硬度最高,摩擦因数也相对较小,膜基结合力在70 N以上.
所属栏目
材料性能及其应用广东省自然科学基金资助项目(07006996A)
收稿日期
2008/9/112009/6/11
作者单位
张馨:华南理工大学材料科学与工程学院, 广州 510641广州有色金属研究院, 广州 510651
肖晓玲:广州有色金属研究院, 广州 510651
洪瑞江:广州有色金属研究院, 广州 510651
罗承萍:华南理工大学材料科学与工程学院, 广州 510641
林松盛:广州有色金属研究院, 广州 510651
备注
张馨(1981-),男,河北唐山人,硕士研究生.
引用该论文:
ZHANG Xin,XIAO Xiao-ling,HONG Rui-jiang,LUO Cheng-ping,LIN Song-sheng.Microstructure and Properties of Diamond-like-carbon Film Doped W[J].Materials for mechancial engineering,2009,33(9):79～84
张馨,肖晓玲,洪瑞江,罗承萍,林松盛.掺杂钨类金刚石膜的显微结构与性能[J].机械工程材料,2009,33(9):79～84
被引情况:
【1】
黄雷,袁军堂,汪振华,于斌斌, "基体温度对线性离子束技术制备α-C∶H薄膜结构和性能的影响",机械工程材料
39, 31-34(2015)
参考文献
【1】
ROBERTSON J.Diamond-like amorphous carbon[J].Material Science and Engineer,2002,R37:129-281.
【2】
INKIN V N,KIRPILENKO G G,DEMENTJEV A A,et al.Diamond-like amorphous carbon[J].Diamond and Related Material,1998,9:715-720.
【3】
FUNADA Y,AWAZU K,YASUI H,et al.Properties of diamond-like carbon[J].Surface and Coatings Technology,1992,50:128-129.
【4】
SEPOLD G,STEPHEN A,METEV S.Diamond-like carbon present status[J].Diamond and Related Materials,1999,8:1677-1682.
【5】
ANGLERAUD B,TESSIER P Y.Improved film deposition of carbon and carbon nitride materials on patterned substrates by ionized magnetron sputtering[J].Surface and Coatings Technology,2004,180/181:59-65.
【6】
VOEVODIN A A,CAPANO M A,LAUBE S J P,et al.Design of a Ti/TiC/DLC functionally gradient coating based on studies of structural in Ti-C thin films[J].Thin Solid Films,1997,298:107-115.
【7】
RICKARD G,MATS L,PER H Q.ME-C:H coatings in motor vehicles[J].Wear,2001,249:302-309.
【8】
CORBELLA C,ONCINS G,GOMEZ M A,et al.Structure of diamond-like carbon films containing transition metals deposited by reactive magnetron sputtering[J].Diamond and Related Materials,2005,14:1103-1107.
【9】
BEILOGUA K,COOPER C V,SPECHT C,et al.Effect of target material on deposition and properties of metal-containing DLC coatings[J].Surface and Coatings Technology,2000,132(2/3):275-283.
【10】
ULIKOVSKY V,BOHAC P,FRANC F,et al.Degradation and stress evolution in a-C,a-C:H and Ti-C:H films[J].Surface and Coating Technology,2001,142/144:702-706.
【11】
YU KULIKOVSKY V,FENDRYCH F,JASTRBIK L,et al.Study of formation and some properties of Ti-C:H films prepared by D.C magnetron sputtering[J].Surface and Coating Technology,1997,91(1/2):122-130.
【12】
GANTENBEIN P,BRUNOLD S,BRUNOLD U,et al.Chromium in amorphous hydrogrnated carbon based thin films prepared in a PACVD process[J].Carbon,1999,37(5):843-846.
【13】
ZAWADZKI J.Infrared study of the interaction of acetone with pure and metal-containing carbons[J].Carbon,1995,33(11):1541-1546.
【14】
MONTEIRO O R,DELPLNCKE-OGLETREE M P,LO R Y,et al.Synthesis and characterization of thin films of WCx produced by mixing and C plasma streams[J].Surface and Coatings Technology,1997,94/95:220-225.
【15】
TUINSTRA F,KOENIG J L.Raman spectrum of graphite[J].The Journal of Chemical Physics,1970,53(3):1126-1130.
【16】
肖晓玲,洪瑞江,林松盛,等.非平衡磁控溅射沉积TiC/a-C多层膜的组织结构[J].材料科学与工程学报,2008,26(5):15-18.
【17】
NIKEL L,JAGODZINSKI P W.Raman spectroscopic characterization of graphites:A re-evaluation ofspectra/ structure correlation[J].Carbon,1993,31(8):1313-1317.
【18】
TANABE Y,YAMANAKA J,HOSHI K,et al.Surface graphitization of furan-resin-derived carbon[J].Carbon,2001,39(15):2347-2353.
【19】
王惠,罗瑞盈,乔生儒.现代仪器分析技术在炭材料研究中的应用[J].炭素技术,1998(5):26-31.
【20】
TAKI Y,KITAGAWA T,TAKAI O.Shielded arc ion plating and structural characterization of amorphous carbon nitride thin films[J].Thin Solid Films,1997,304:183-190.
