对TA2钛合金焊接接头的母材区、熔合线、焊缝中心和热影响区的疲劳裂纹扩展速率、疲劳断口形貌以及显微组织进行了研究。结果表明:接头各区域的疲劳裂纹扩展速率相差不大,可直接用焊缝区的裂纹扩展速率表示;各区域试样的断口呈典型的疲劳断口形貌;母材区的平均晶粒尺寸约62.8
μm,热影响区的约为110
μm,晶粒尺寸对疲劳裂纹扩展速率没有明显影响。
所属栏目
试验研究国家自然科学基金资助项目(51475223,51675260)
收稿日期
2016/12/92017/8/23
作者单位
文磊磊:南京工业大学机械与动力工程学院, 南京 211816
周昌玉:南京工业大学机械与动力工程学院, 南京 211816
李建:南京工业大学机械与动力工程学院, 南京 211816
陆磊:南京工业大学机械与动力工程学院, 南京 211816
备注
文磊磊(1991-),男,安徽安庆人,硕士研究生
引用该论文:
WEN Leilei,ZHOU Changyu,LI Jian,LU Lei.Fatigue Crack Propagation Rates in Different Zones of TA2 Titanium Alloy Welded Joint[J].Materials for mechancial engineering,2017,41(11):39~44
文磊磊,周昌玉,李建,陆磊.TA2钛合金焊接接头不同区域的疲劳裂纹扩展速率[J].机械工程材料,2017,41(11):39~44
参考文献
【1】
贾翃,逯福生,郝斌.2015年中国钛工业发展报告[J].中国钛业,2016,33(1):1-6.
【2】
商国强,朱知寿,常辉,等.超高强度钛合金研究进展[J].稀有金属,2011,35(2):286-290.
【3】
CAO C X. Change of material selection criterion and development of high damage-tolerant titanium alloy[J]. Acta Metallurgica Sinica, 2002, 38(S1): 4-11.
【4】
GONG J C, WILKINSON A J. Anisotropy in the plastic flow properties of single-crystal α titanium determined from micro-cantilever beams[J].Acta Materialia,2009,57(19):5693-5705.
【5】
LI J Y, LI B F, FENG G X. Effect of weld geometrical features on fatigue properties of 5A30 aluminum alloy welded joints[J]. Chinese Journal of Nonferrous Metals, 2004, 14(11):1895-1900.
【6】
方洪渊. 焊接结构学[M]. 北京:机械工业出版社,2008.
【7】
PARK S S, TANG W N, YOU B S. Microstructure and mechanical properties of an indirect-extruded Mg-8Sn-1Al-1Zn alloy[J]. Materials Letters, 2010, 64(1):31-34.
【8】
史耀武,史轩. HG80钢及其焊接接头的疲劳裂纹扩展[J].机械工程材料,2003,27(8):5-7.
【9】
ZHANG H, PEI F, YAN Z, et al. Fatigue crack propagation behavior of as-extruded AZ31B Mg alloy welded joint[J]. Rare Metal Materials and Engineering, 2012, 41(6):967-972.
【10】
黄嘉,季英萍,秦丽晔,等. GH4169合金惯性摩擦焊焊接接头疲劳裂纹扩展性能[J].航空材料学报,2013,33(6):45-50.
【11】
薛彬,张天会,王时越,等. ADB610钢焊接接头中疲劳裂纹的扩展速率[J].机械工程材料,2015,39(10):90-94.
【12】
李行志,胡树兵,肖建中,等. TA15钛合金电子束焊接接头不同区域的疲劳裂纹扩展行为研究[J].航空材料学报,2010,30(1):52-56.
【13】
OH J, KIM N J, LEE S, et al. Correlation of fatigue properties and microstructure in investment cast Ti-6Al-4V welds[J]. Materials Science and Engineering A, 2003, 340(1/2):232-242.
【14】
WU B, LI J, GONG S, et al. Fatigue crack growth properties and fatigue crack growth life of the EB-joints of TC17 titanium alloy[J]. Rare Metal Materials and Engineering, 2009, 38(12):170-174.
【15】
KIDANE A, SHUKLA A. Quasi-static and dynamic fracture initiation toughness of Ti/TiB layered functionally graded material under thermo-mechanical loading[J]. Engineering Fracture Mechanics, 2010, 77(3): 479-491.