返回顶部
位置:标准分享网>机械工程材料论文>高能微弧合金化制备Ni3Al(Cr)涂层及其高温抗氧化性能
高能微弧合金化制备Ni3Al(Cr)涂层及其高温抗氧化性能
  • 资料大小:

  • 更新时间:

    2009-11-20

  • 授权方式:

    共享学习

  • 资料格式:

    PDF

  • 软件等级:

  • 官方主页:

    http://www.ndt88.com

资料简介

采用高能微弧合金化技术在K3合金表面制备了Ni3A1(Cr)涂层;对其制备工艺进行了优化,并对涂层在1 000 ℃下的氧化行为进行了研究.结果表明:用高能微弧合金化技术可在K3合金表面制备出微晶涂层,阳极材料采用铸态Ni3Al(Cr)金属间化合物所得涂层能够与基体形成冶金结合;在1 000 ℃下,所得涂层因晶粒细化可以在较短时间内生成连续保护性富铝/铬氧化膜,而铸态电极和K3合金不能形成连续致密的氧化膜,因此所得涂层比铸态Ni3Al(Cr)电极和K3合金具有更好的抗氧化性能,并且NiO和尖晶石的生成量也减少.

所属栏目

材料性能及其应用

收稿日期

2009/11/202010/9/5

作者单位

郭平义:江苏科技大学先进焊接技术省重点实验室, 镇江 212003中国科学院金属研究所金属腐蚀与防护国家重点实验室, 沈阳 110016
曾潮流:中国科学院金属研究所金属腐蚀与防护国家重点实验室, 沈阳 110016
邵勇:江苏科技大学先进焊接技术省重点实验室, 镇江 212003

备注

郭平义(1979-),女,江苏镇江人,讲师,博士.

引用该论文:

GUO Ping-yi,ZENG Chao-liu,SHAO Yong.Preparation of Ni3Al(Cr)Coating by High Energy Micro-arc Alloying and Its High Temperature Oxidation Resistance[J].Materials for mechancial engineering,2010,34(12):62~66
郭平义,曾潮流,邵勇.高能微弧合金化制备Ni3Al(Cr)涂层及其高温抗氧化性能[J].机械工程材料,2010,34(12):62~66


参考文献

【1】

FRANGINI S,MASCI A.Intermetallic FeAl based coatings deposited by the electrospark technique:corrosion behavior in molten (Li+K),carbonate[J].Surface and Coatings Tech-nology,2004,184:31-39.

【2】

FRANGINI S,MASCI A,BARTOLOMEO A D.Cr7C3-based cermet coating deposition on stainless steel by electrospark process:structural characteristics and corrosion behavior[J].Surface and Coatings Technology,2002,149:279-286.

【3】

AGARWAL A,NARENDRA D B.In-situ synthesis of intermetallic and ceramic coating using pulse electrode surfacing[J].Scripta Materialia,2000,42:493-498.

【4】

XIE Y J,WANG M C.Microstructural morphology of electrospark deposition layer of high gamma prime superalloy[J].Surface and Coatings Technology,2006,201(3/4):691-698.

【5】

LEVASHOV P V,VAKAEV.Disperse-strengthening by nanoparticles advanced tribological coatings and electrode materials for their deposition[J].Surface and Coatings Techno-logy,2007,201(13):6176-6181.

【6】

WANG R J,QIAN Y Y,LIU J.Interface behavior study of WC92-Co8 coating produced by electrospark deposition[J].Applied Surface Science,2005,240:42-47.

【7】

郭平义,邵勇,李垒,等.高能微弧合金化制备Fe3Al微晶涂层及其高温氧化性能[J].中国腐蚀与防护学报,2009,29(6):431-435.

【8】

LI H F,TAO S F,ZHOU Z h,et al.Element diffusion during fabrication of EB-PVD NiAl coating and its 1 100 ℃ isothermal oxidation behavior (Ⅱ)[J].Surface and Coatings Technology,2007,201(15):6589-6592.

【9】

HORTON J A,CATHCART J V,LIU C T.Effect of chromium on early stages of oxidation of Ni3Al alloy at 600 ℃[J].Oxidation of Metal,1998,29:347-365.

【10】

GESMUNDO F,NIU Y,VIANI F.The transition from the formation of mixed scales to the selective oxidation of the most reactive component in the corrosion of single and two phase binary alloys[J].Oxidation of Metals,1993,40:373-393.

标准分享网无损检测论文频道,免费下载【高能微弧合金化制备Ni3Al(Cr)涂层及其高温抗氧化性能】,仅供学习使用,不得商用,如需商用请购买正版高能微弧合金化制备Ni3Al(Cr)涂层及其高温抗氧化性能。谢谢合作

【关键词】 Ni3Al(Cr)涂层 高能微弧合金化 高温氧化  郭平义 曾潮流 邵勇

猜下面文档对你有所帮助
机械工程材料论文排行